您的位置：首页 > 论文页面
考虑传热面固液接触角影响的池内核态沸腾预示模型
发表时间：2013-04-30 浏览量：1527 下载量：720
| 全部作者： | 李元阳，刘振华 |
| 作者单位： | 上海交通大学机械与动力工程学院 |
| 摘 要： | 针对固液接触角对池内核态沸腾特性的影响进行实验和半理论分析。对不考虑固液接触角影响的Benjamin和Balakishnan半理论模型框架进行改进，提出了考虑固液接触角影响的预示模型。按气泡成长时间与气泡脱离直径的耦合关系，直接根据接触角计算气泡脱离直径并由此计算气泡成长时间。同时将气泡下微液层面积表示为接触角的经验函数，使该计算模型适用于不同固液接触角的加热面。从模型分析上得到了固液接触角对池内核态沸腾特性的影响规律，模型预测结果与亲水面实验结果吻合良好。 |
| 关 键 词： | 工程热物理；沸腾；固液接触角；换热特性 |
| Title： | A predictive model of nucleate pool boiling on the heated surface with changing contact angle |
| Author： | LI Yuanyang, LIU Zhenhua |
| Organization： | School of Mechanical Engineering, Shanghai Jiaotong University |
| Abstract： | Experimental study and semi-theoretical analysis were conducted on the nucleate pool boiling characteristics of the heating surface with changing contact angle. Since the semi-analytical modeling framework of Benjamin and Balakrishnan did not consider the effect of contact angle, combining with the above model and the effect of contact angle, a revised semi-analytical model was proposed in this paper. Based on the coupling relation of the bubble growth time and the bubble departure diameter, the selected correlation of bubble departure diameter could be used to directly calculate the bubble growth time and the microlayer area under the bubble with changing contact angle. These improvements make the present model be suitable for the heating surface with changing contact angle. Rules and effect of contact angle on the nucleate pool boiling characteristics of heating surface were also obtained from the semi-analytical model. In addition, the predicted results were in good agreement with experimental results on hydrophilic heating surface. |
| Key words： | engineering thermophysics; boiling; contact angle; heat transfer characteristics |
| 发表期数： | 2013年4月第8期 |
| 引用格式： | 李元阳，刘振华. 考虑传热面固液接触角影响的池内核态沸腾预示模型[J]. 中国科技论文在线精品论文，2013，6（8）：735-741. |
0
评论数 0请您登录
暂无评论
下载全文
多维论文