您的位置:首页  > 论文页面

数值模拟研究风机转速对薄膜生产线热风系统预热段流场的影响

发表时间:2015-01-31  浏览量:2026  下载量:502
全部作者: 王建,陈东杰,杨璐,刘亮,唐必连
作者单位: 北京理工大学化工与环境学院;桂林电器科学研究院有限公司
摘 要: 薄膜生产线热风系统流场的稳定性决定了塑料薄膜最终定型的质量,为优化热风系统流场的均匀性和稳定性,通过数值模拟技术,采用2种风机转速(1 200,1 600 r/min),研究薄膜生产线热风系统预热段在175℃热风条件下的流场情况,重点研究2种风机转速对速度场、压力场和温度场的影响情况。研究表明:降低转速可以提高中间气垫层速度和温度分布的均匀性,但会使中间气垫层的压力分布均匀性降低。
关 键 词: 机械设计原理与方法;薄膜生产线;热风系统;风机转速;数值模拟
Title: Numerical simulation of fan speed influence on flow fields in the preheating section of a hot air system for film production
Author: WANG Jian, CHEN Dongjie, YANG Lu, LIU Liang, TANG Bilian
Organization: School of Chemical Engineering and Environment, Beijing Institute of Technology; Guilin Electrical Equipment Scientific Research Institute Co. Ltd.
Abstract: The quality of plastic film depended on the stability of the hot air system of film production line. In order to optimize the uniformity and stability of the flow fields in the hot air system, the flow fields of the preheating section of a hot air system were numerically simulated in this paper. Two different fan speeds (1 200, 1 600 r/min) were used when the temperature of the hot air was 175℃. The changes of the velocity, pressure and temperature were investigated. The results showed that decreasing fan speed could improve the uniformity of the velocity and temperature in the middle cushion layer, but it will reduce the uniformity of the pressure.
Key words: principle and method of mechanical design; film production line; hot air system; fan speed; numerical simulation
发表期数: 2015年1月第2期
引用格式: 王建,陈东杰,杨璐,等. 数值模拟研究风机转速对薄膜生产线热风系统预热段流场的影响[J]. 中国科技论文在线精品论文,2015,8(2):150-156.
 
0 评论数 0
暂无评论
友情链接