您的位置:首页  > 论文页面

基于ANSYS Workbench的4 000 Nm全液压坑道钻机回转平台的优化设计

发表时间:2017-06-30  浏览量:56  下载量:9
全部作者: 杨帅,韩超
作者单位: 合肥工业大学机械工程学院;宿州市公路管理局砀山分局
摘 要: 利用有限元仿真软件ANSYS Workbench对钻机回转平台进行有限元仿真分析,验证了平台满足一系列的设计要求,且具有一定的优化空间。运用ANSYS Workbench的优化模块对回转平台进行优化设计,选择板厚为设计变量,平台自身重量为目标函数,最终得出3组最优解。选择其中最大应力与最小平台质量两个优化目标达到平衡的一组解,使其达到节约板材、减轻自重的目的。
关 键 词: 煤矿开采;回转平台;ANSYS Workbench;仿真;优化设计
Title: Design and optimization of slewing platform for 4 000 Nm full hydraulic tunnel drilling rig based on ANSYS Workbench
Author: YANG Shuai, HAN Chao
Organization: School of Mechanical Engineering, Hefei University of Technology; Dangshan Branch, Suzhou City Highway Administration Bureau
Abstract: The finite element simulation software ANSYS Workbench is used to carry out the simulation analysis of the slewing platform. It is verified that the platform meets the design requirements and still has some optimization space. The optimization module of ANSYS Workbench is used to optimize the design of the slewing platform. The thickness of the platform is chosen as the design variable and the platform weight is set as the objective function. Finally, three sets of optimal solutions are obtained, and a set of solutions is chosen, in which the optimization of the maximum stress and the minimum platform quality is achieved in balance. So that it can reach the purposes of saving the plate and reducing the weight.
Key words: coal mining; slewing platform; ANSYS Workbench; simulation; design and optimization
发表期数: 2017年6月第12期
引用格式: 杨帅,韩超. 基于ANSYS Workbench的4 000 Nm全液压坑道钻机回转平台的优化设计[J]. 中国科技论文在线精品论文,2017,10(12):1381-1386.
 
0 评论数 0
暂无评论
友情链接