您的位置：首页 > 论文页面
等静压辅助凝胶注模成型制备高致密Ba0.7Sr0.3TiO3陶瓷
发表时间：2008-07-31 浏览量：1914 下载量：864
| 全部作者： | 谢甜甜，姜胜林，范茂彦 |
| 作者单位： | 华中科技大学电子科学与技术系 |
| 摘 要： | 采用凝胶注模成型制备Ba0.7Sr0.3TiO3陶瓷坯体。为了提高陶瓷的致密度，对干燥后的坯体进行冷等静压(cold isostatically press, CIP)处理。研究结果表明：冷等静压压力为100 MPa时，坯体的机械强度从29.6 MPa提高到32.8 MPa,陶瓷的相对密度从无压时的96.4%增加到98.2%.等静压辅助凝胶注模成型制备的陶瓷相对于传统等静压法制备的陶瓷，晶粒小而均匀、结构致密,是一种理想的制备功能陶瓷材料的新方法。 |
| 关 键 词： | 无机陶瓷材料；凝胶注模；冷等静压；微观结构；功能陶瓷 |
| Title： | Preparation of compact Ba0.7Sr0.3TiO3 ceramic by the combination of cold isostatically press and gel-casting |
| Author： | XIE Tiantian, JIANG Shenglin, FAN Maoyan |
| Organization： | Department of Electronic Science and Technology, Huazhong University of Science and Technology |
| Abstract： | The Ba0.7Sr0.3TiO3 green body has been prepared by the combination of gel-casting and cold isostatically press (CIP). The process is similar to the conventional gel-casting method except for adopting CIP on the dried green body. The effect of CIP pressure on the sintered density has been studied. The optimal CIP pressure is 100 MPa. The green body exhibits high bending strength as high as 32.8 MPa and the density of sintered body is 98.2% of theoretic, respectively. The microstructure of the sample has shown more homogeneous and compact than gel-casting and CIP solely. The combination of gel-casting and CIP could effectively prepare high density ceramics. |
| Key words： | abio-stupalith; gel-casting; cold isostatically press; microstructure; functional ceramics |
| 发表期数： | 2008年11月第14期 |
| 引用格式： | 谢甜甜，姜胜林，范茂彦. 等静压辅助凝胶注模成型制备高致密Ba0.7Sr0.3TiO3陶瓷[J]. 中国科技论文在线精品论文，2008，1（14）：1634-1638. |
2
评论数 0请您登录
暂无评论
下载全文
多维论文