您的位置：首页 > 论文页面
基于CAN现场总线的双丝脉冲MIG焊相位协同控制系统
发表时间：2014-03-31 浏览量：2016 下载量：824
| 全部作者： | 吴开源，程佳，章涛，黄玺 |
| 作者单位： | 华南理工大学机械与汽车工程学院 |
| 摘 要： | 为解决双丝脉冲熔化极惰性气体（metal inert-gas, MIG）焊主从机两路脉冲输出之间交替相位控制问题，采用控制器局域网（controller area network, CAN）现场总线构建双丝脉冲MIG焊主从机之间的通信网络，使两路脉冲获得相同频率的180°相差交替相位输出，有效减少了双电弧之间的干扰，稳定了双电弧，提高了焊接速度。试验结果表明：所设计的基于CAN现场总线的双丝脉冲MIG焊相位协同控制系统满足设计要求，焊接过程稳定，焊缝成形美观，能实现良好的双丝脉冲MIG焊过程。 |
| 关 键 词： | 焊接工艺与设备；双丝脉冲熔化极惰性气体焊；控制器局域网；相位协同控制 |
| Title： | CAN based phase synchronic control system for twin-wire pulsed MIG welding |
| Author： | WU Kaiyuan, CHENG Jia, ZHANG Tao, HUANG Xi |
| Organization： | School of Mechanical & Automotive Engineering, South China University of Technology |
| Abstract： | To overcome the alternation type phase output of two pulsed waveform for master and salve power supply of twin-wire pulsed metal inert-gas (MIG) welding, a communication net between master and salve power supply was presented, which was established based on controller area network (CAN), and the alternation type phase output of two pulsed waveform with the same frequency and the 180�discrepancy of phase was realized, it could reduce the interaction of twin arc, enhance the stability of twin arc and improve travel speed effectively. The results of the experiment demonstrated that the developed CAN based phase synchronic control system for twin-wire pulsed MIG welding met the design requirements, and the merits of the twin-wire high speed welding were stable welding process and perfect weld seam formation. |
| Key words： | technology and equipment of jointing; twin-wire pulsed metal inert-gas welding; controller area network; phase synchronic control |
| 发表期数： | 2014年3月第6期 |
| 引用格式： | 吴开源，程佳，章涛，等. 基于CAN现场总线的双丝脉冲MIG焊相位协同控制系统[J]. 中国科技论文在线精品论文，2014，7（6）：615-620. |
0
评论数 0请您登录
暂无评论
下载全文
多维论文