您的位置:首页  > 论文页面

扩散退火对NiTi/NiTi爆炸复合板相变行为的影响

发表时间:2008-07-31  浏览量:1779  下载量:801
全部作者: 燕铸,崔立山,郑雁军
作者单位: 中国石油大学(北京)材料科学与工程系
摘 要: 采用爆炸焊将2种不同成分的NiTi形状记忆合金板复合,复合板热轧后具有良好的焊接界面。示差扫描量热仪(differential scanning calormetry, DSC)结果表明,扩散退火处理前复合板在降温和升温过程中有2个独立的放热和吸热峰,分别对应于不同成分NiTi板的马氏体正逆相变;经850℃扩散退火处理后,复合板的DSC曲线在原有两相变峰之间出现1个对应界面区域的相变峰,且随着扩散退火时间的增加,该相变峰面积逐渐增大;当退火时间达12 h时,DSC曲线上只有1个相变峰,且相变温度范围较宽。
关 键 词: 金属材料;爆炸焊;NiTi复合板;扩散退火;马氏体相变
Title: The effects of diffusion annealing on the transformation behaviors of NiTi/NiTi composite plate synthesized by explosive welding
Author: YAN Zhu, CUI Lishan, ZHENG Yanjun
Organization: Department of Materials Science and Engineering, China University of Petroleum, Beijing
Abstract: Two NiTi shape memory alloy plates with different compositions were synthesized by explosive welding. After hot rolling, a perfect interfacial bonding of the composite plate was observed. DSC results showed two separate peaks corresponded to the forward or reverse transformation of NiTi plates with different compositions during the cooling or heating process before diffusion annealing. However, after diffusion annealing at 850℃, a transformation peak of the welding interface appeared between the two original peaks. Moreover, the area of this peak increased with the rising annealing time. When annealed for 12 h, the specimen showed a continuous curve with wide transformation temperature window in the DSC test.
Key words: metallic material; explosive welding; NiTi composite plate; diffusion annealing; martensitic transformation
发表期数: 2008年11月第14期
引用格式: 燕铸,崔立山,郑雁军. 扩散退火对NiTi/NiTi爆炸复合板相变行为的影响[J]. 中国科技论文在线精品论文,2008,1(14):1639-1642.
 
2 评论数 0
暂无评论
友情链接