您的位置：首页 > 论文页面
1 064 nm激光增透、半透半反和全反膜的设计与 制备方法研究
发表时间：2018-07-13 浏览量：1311 下载量：334
| 全部作者： | 王保松 |
| 作者单位： | 江苏金陵机械制造总厂 |
| 摘 要： | 对1 064 nm波段激光增透、半透半反及全反膜的抗激光损伤阈值和稳定性进行工艺研究，从膜料选择、薄膜设计、薄膜镀制、性能参数测试与试验考核4个方面重点讨论提高激光膜综合使用性能的方法和途径，并完成激光镜片膜层的制备。性能参数测试与试验考核结果表明，实测曲线与模拟光谱曲线在1 064 nm波长处数值吻合；膜层参数达到军标GJB 2485—95常用环境试验测试要求，经试验测试证实膜层的抗激光损伤阈值达到100 MW/cm2的水平。 |
| 关 键 词： | 凝聚态物理学；激光膜层；透过率；抗激光损伤阈值 |
| Title： | Study on the design and preparation of 1 064 nm laser antireflective, transflective and total reflection films |
| Author： | WANG Baosong |
| Organization： | Jiangsu Jinling Machinery Manufacturing General Factory |
| Abstract： | In this paper, the process of anti laser damage threshold and the stability of the 1 064 nm band laser antireflective, transflective and total reflection films were studied. The method and the way of improving the comprehensive use of laser film performance were emphatically discussed through four aspects of the film material selection, film design, film preparation, and performance parameters tests and experiments. Then, the preparation of coatings of laser lens was completed. The results of performance parameters tests and experiments showed that the measured curves and simulated spectra curves were numerically identical at the wavelength of 1 064 nm. The parameters of coatings reached military standard GJB 2485—95 common environmental testing requirements. The anti laser damage threshold of the coating reached to 100 MW/cm2 was confirmed by the experiments. |
| Key words： | condensed matter physics; laser coating; transmittance; anti laser damage threshold |
| 发表期数： | 2018年7月第13期 |
| 引用格式： | 王保松. 1 064 nm激光增透、半透半反和全反膜的设计与 制备方法研究[J]. 中国科技论文在线精品论文，2018，11（13）：1345-1350. |
7
评论数 0请您登录
暂无评论
下载全文
多维论文