您的位置:首页  > 论文页面

电液复合二板直压式注塑机的锁模精度及制品质量重复精度测试

发表时间:2019-10-31  浏览量:1644  下载量:129
全部作者: 李建军,王建
作者单位: 广东正茂精机有限公司;北京化工大学机电工程学院
摘 要: 为进一步提高中小型注塑机的精度,采用四缸联锁内循环液压驱动的二板直压式合模系统和全电动注塑系统相结合的技术,设计制造出电液复合二板直压式注塑机。研究结合相关测试标准,对新设计的注塑机进行测试,主要以锁模精度和制品质量重复精度为关键指标来评价新注塑机的性能。测试结果表明,新设计制造的注塑机的锁模精度和制品质量重复精度均达到了注塑机通用技术条件,拉杆偏载率达到了精密注塑机的标准,但制品质量重复精度与精密注塑机标准有少许差距。
关 键 词: 机械制造工艺与设备;电液复合;注塑机;锁模;质量重复精度
Title: Clamping precision and product weight repeatability tests of electro-hydraulic composite two-plate direct-compression injection molding machine
Author: LI Jianjun, WANG Jian
Organization: Guangdong Bloomachine Co. Ltd.; College of Mechanical and Electrical Engineering, Beijing University of Chemical Technology
Abstract: In order to further improve the precision of small and medium-sized injection molding machines, a four-cylinder interlocking internal hydraulic drive two-plate direct-compression clamping system and an all-electric injection system were combined to design and manufacture an electro-hydraulic composite two-plate direct-compression injection molding machine. In this paper, the newly designed injection molding machine was tested in combination with the relevant test standards. The performance of the new injection molding machine was evaluated mainly by the key indicators of clamping precision and product weight repeatability. The test results showed that the clamping precision and the product weight repeatability of the newly designed injection molding machine achieved the normal technique conditions of the injection molding machines, and the slope of the tie rods reached the standard of precision injection molding machine, but the product weight repeatability had a slight gap to the standard of precision injection molding machine.
Key words: technology and equipment of machinery manufacture; electro-hydraulic composite; injection molding machine; clamping; weight repeatability
发表期数: 2019年10月第5期
引用格式: 李建军,王建. 电液复合二板直压式注塑机的锁模精度及制品质量重复精度测试[J]. 中国科技论文在线精品论文,2019,12(5):720-725.
 
6 评论数 0
暂无评论
友情链接